Cromax® introduces a new zinc chromate-free primer surfacer – PS1600A 1K Sandthrough Sealer. It has been specially developed for application under Cromax waterborne basecoat technologies and over small sand through areas on bare metals including steel, aluminium and galvanised steel. It can also be used on sanded OEM and sanded cured repair finishes.
Kevin Welling, Training Academy Manager for Axalta Coating Systems in the UK and Ireland, says, “PS1600A 1K Sandthrough Sealer offers our refinishers a host of benefits, and it is an important addition to the Cromax undercoat portfolio. It is designed specifically for refinishers already in the spray booth who notice a small area, like an edge, which has been sanded down to the metal. Rather than use a wash-primer and filler, which can take a while to dry, refinishers only need to shake the aerosol can, to spray one or two coats of PS1600A 1K Sandthrough Sealer over the affected area, allowing it to flash-off, and let it dry for 10 minutes at 20oC. Once dry, they can then apply the basecoat. The addition of PS1600A 1K Sandthrough Sealer to our portfolio strengthens our commitment to help our bodyshops increase their productivity.”
PS1600A 1K Sandthrough Sealer comes in a handy 400ml aerosol spray can and offers an extremely good corrosion resistance. Thanks to its neutral medium grey colour, PS1600A 1K Sandthrough Sealer ensures minimum discolouration to Cromax Basecoat.
To find out more about PS1600A 1K Sandthrough Sealer, please visit www.cromax.com/gb to download corresponding Technical and Material Safety Data Sheets or contact the local Cromax representative.